Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Troubleshooting
If you have difficulty with your humidity control, please try the following suggestions.
Most problems can be corrected quickly and easily.
Display is
blank
Humidity
settings do
not change
• Check circuit breaker and reset if necessary.
• Check for 24VAC between R and C at the wall plate.
• Make sure power switch at heating and cooling system is on.
• Make sure furnace door is closed securely.
Make sure the humidity is set to an acceptable range:
• Check current range stop settings in Installer Setup.
• Auto Mode: 1–10 (up to 11 if Humidity Boost is enabled)
• Manual Mode: 20%–60%
• Dehumidification Mode: 40%–80%
29
Tabla de contenido
