AEG DVK 4628 Instrucciones De Servicio página 57

3D-преобразователь AEG DVK 4628
Купить в интернет-магазине http://clatronic-shop.com.ua
3. Put on one of the supplied sets of glasses.
4. Select the appropriate 3D conversion.
2DTV with 2D program button (8/8)
Press this button to display image content in 2D on a 2D TV. The indicator (4) comes on.
3DTV with 2D program button (10/2)
Press this button to display image content in 2D on a 3D TV. The indicator (6) comes on.
2DTV with 3D program button (9/7)
Press this button to display image content in 3D on a 2D TV. The indicator (5) comes on.
3DTV with 3D program button (3 on the remote control)
Press this button to display image content in 3D on a 3D TV. The indicator (specified
above) remains lit.
Troubleshooting
Symptoms
There is no picture on the screen.
Blurred ghost image
The unit cannot be operated.
No sound can be heard.
Potential cause/solution
• Make sure that the HDMI cables are
plugged in correctly.
• Check whether all devices are switched
on.
• Make sure that the correct input is set
on your TV.
Activate BY PASS mode by pressing the BY
PASS button (7/1). You can use this to play
back 2D image content in the normal way.
Unit hangs and crashes. Disconnect the
mains plug for around 5 seconds. Then
switch the unit back on.
• Make sure that the HDMI cables are
plugged in correctly.
• Make sure that the volume of signal
source and your TV is set to low.
English
57