AEG DVK 4628 Instrucciones De Servicio página 56

3D-преобразователь AEG DVK 4628
Купить в интернет-магазине http://clatronic-shop.com.ua
English
56
• Now plug the other end into a free HDMI connector on your signal source (e.g. DVD
player).
• Now use the second HDMI cable to connect your TV set to the 3D TV Box. To do so,
plug one end of the cable into the HDMI OUT connector (15) on the back of the 3D TV
Box.
• Now plug the other end into a free HDMI connector of your TV set.
Operation
Switch unit on/off
• Switch the unit on by switching the power switch on the back of the unit to "I".
• To switch the unit off, switch the power switch to "O".
POWER button (9 on the remote control)
You can use the POWER button to switch the unit between standby and on mode. The
power-on indicator (1) is turned off when in standby mode.
BY PASS button (7/1)
The signal is forwarded to the connected TV without conversion. The indicator (3) comes
on.
Select intensity of the 3D effect
If watching a 2D program, you can select the intensity of the 3D effect with the buttons
WEAK, MEDIUM and STRONG.
Converting to 3D Effect
NOTE:
• The 3D conversion depends on the file format.
• We recommend 2.5 times the screen size as the optimum viewing distance.
• The viewing angle should be 75° (right/left to the center of the screen) and your eyes
should be level with the center of the screen.
• For best possible quality, we also recommend that you darken the room.
After you have connected everything:
1. Switch on the source of the video signal to be converted.
2. Start playback of the source (e.g. DVD player).