Technical Data; Items Supplied; Appliance Description; Assembly - Kompernaß KH 4164 Instrucciones De Uso

Technical data

Mains voltage:
Power cable length:
Power consumption :
Protection class:
Bulb type:
Lamp base:

Items supplied

1 Desk lamp, pre-assembled
1 Counterweight
1 Hexagon spanner
1 Suction disc for bulb exchanges
1 Operating manual
• Check to ensure that the appliance is undamaged,
all component parts are present and that pack-
aging remnants are removed from it.

Appliance description

Counterweight
q
Power cable
w
Hexagon spanner
e
Suction disc
r
Switch
t
Lever for lamp adjustment
y
Lever for swivel-arm locking
u
230-240 V ~ 50Hz
1.8 m with switch
50 W
II /
max. 50 W / GU 10
16 cm in diameter

Assembly

For reasons of transportation the lamp is supplied
pre/assembled.First put the components together
completely before operating the lamp:
• Turn the counterweight
swivel-arm.
• Carefully pull the power cable
the lamp base until the swivel arm is flush in the
lamp base.
• Lock the swivel arm into the lamp base with the
hexagon spanner
• Place the suction disc
bulb and press it firmly. Guide the bulb into the
bulb holder and secure it by turning it through
a quarter-turn in a clockwise direction.
Attention!
Do not forget to remove the suction disc! Do
NOT operate the lamp with the suction disc
fitted – it would be melted immediately by the
heat.

Utilisation

• Place the lamp at a suitable location, as detailed
in the Safety Instructions.
• Insert the power cable into the wall socket. You
can now switch the lamp on and off at the
switch .
t
• Always adjust the position of the lamp with the
lever , not with the lamp housing. This can
y
get very hot when in use.
• You can adjust the swivel-arm in that you first
loosen the locking device
arm to the desired position and then retighten
the locking device.
- 11 -
onto the rear of the
q
so far out of
w
.
e
onto the front of the
r
. Move the swivel-
u