SCOOT AND RIDE 181206 Manual De Instrucciones página 11

IMPORTANT information!
This headgear is designed to absorb the energy of a blow by partial destruction or damage itself. Even though such damage
may not be visible, the helmet should be destroyed or replaced if it is involved in an injury-related fall. UNFORTUNATELY
some accidents result in head injury that cannot be prevented by ANY helmet. Depending on the type of impact, even very low speeds can
result in a serious head injury or fatality. Always ride with extreme caution and be sure to read this manual before using the product.
WARNING!
.The Bicycle-Sports Safety Helmet is designed and intended exclusively for use while cycling and other non-motorized sports. It is not
intended for and will not provide adequate safe protection if used during motorsport or moped use.
. Before every use make sure the chinstrap is closed
. The helmet should be regularly checked for damages
. Children should not wear this helmet during activities such as climbing due to the risk of strangulation.
That could occur if the helmet caught on something.
No helmet can protect the wearer against all unforeseeable impacts. However, for maximum protection, the helmet must fit well and all
retention straps must be securely fastened. For safety reason this helmet has a limited lifetime and should be replaced when it shows
obvious signs of wear but at the latest within 5 years after the date of manufacture (products batch number). This helmet is designed to
protect impact cause by collision of head with an obstacle while cycling or roller skating.
Final Check | The important thing to remember is that the helmet fits snugly. If you can tilt it forward or backward you need to tighten the
strap adjustment. The straps should be positioned that they to not cover the ears and that the buckle is away from the jaw when correctly
fitted. User should always try different sizes and choose the size which feels secure and comfortable on the head. It is important the helmet
fit snugly on your head and must be fastened to provide maximum protection. All adjustments should be checked each time the helmet is
worn, making sure it fits snugly at all times.
Caring for your helmet | Clean the helmet only with lukewater or a damp cloth. The use of solvents, paints or decals (sticker) can
cause damage to the helmet and make it ineffective in the result of an accident.
Keep your helmet out of extreme heat | Helmets will be damaged if exposed to temperatures exceeding 65°C. Vehicles and sto-
rage bags can exceed this on very hot days. Heat damaged helmets will have random disfigured areas where the texture appears bubbly
and uneven. If damaged, helmets should be destroyed and replaced immediately.
Limited warranty | The product applies to the minimum staturory warranty of the particular country on material- and productiondefects.
During this time it is in Scoot & Ride's discretion if products are repaired or replaced. This warranty is not covering defects originated in
improperly use such as uncorrect assembling, careless handling or common wearout.
Warranty adjustments | Warranty claim is solely coming into effective with proof of purchase. Due to that it is absolutly nesseccary to keep
your receipt. In case of warranty claim Scoot & Ride or the responsible dealer is deciding if the product will be repaired or replaced or else.
Disposal note | Please take your helmet to a disposal facility at the end of its life.