Technical Data; Intended Use Of The Machine; Employee Training; Pre-Use Checks - CEMB SM628 Manual De Uso

1.2.d TECHNICAL DATA
- Maximum size of conventional tyres - see tyre changer manual
- Maximum size of PAX tyres - as in following table
- Tyre diameter ................................................................................................. 810 mm
- Minimum rim hole diameter ............................................................................... 40 mm
- Operating pressure (minimum ............................................................................. 8 bar
- Operating pressure (maximum).......................................................................... 10 bar
- Pneumatic cylinder force (at 8 bar) ...................................................................7400 N
- Total weight ..........................................................................................................90 kg
- Central unit weight................................................................................................70 kg
- PAX kit weight ......................................................................................................24 kg
- Beadpressing arm BPS kit weight ........................................................................10 kg
- Maximum The accessory size:
• Height .........................................................................................................1300 mm
• Width .............................................................................................................600 mm
• Depth ............................................................................................................900 mm
- Noise level: A-weighted sound pressure level (LpA) at the working position ... < 70 dB (A)
The noise levels indicated correspond to emission levels and do not necessarily re-
present safe operating levels. Although there is a relationship between emission levels
and exposure levels, this cannot be used reliably to establish whether or not further
precautions are necessary.
The factors which determine the level of exposure to which the operator is subject to
include the duration of the exposure, the characteristics of the workplace, other sources
of noise, etc. The permitted exposure levels may also vary according to the country.
However, this information will enable The accessory users to make a more accurate
assessment of hazards and risks.

1.3. INTENDED USE OF THE MACHINE

This The accessory must be used only to remove and replace an automotive tyre on an
automotive rim, using the tools with which it is equipped. Any other use is improper and
can result in an accident. The accessory can not work on motorcycle wheels.

1.4. EMPLOYEE TRAINING

See Chapter EMPLOYEE TRAINING in the tire changer manual on that will be installed/
used The accessory.

1.5. PRE-USE CHECKS

Before beginning work, carefully check that all components of The accessory, espe-
cially rubber or plastic parts, are in place, in good condition and working properly. If the
inspection reveals any damage or excessive wear, no matter how slight, immediately
replace or repair the component.
User's manual
EN
9