Ambient Working Conditions; Fitting - CEMB SM628 Manual De Uso

Ambient working conditions

- Relative humidity 30% ÷ 95% without condensation.
- Temperature 0°C ÷ 50°C.

3.2. FITTING

Before any installation work, check to make sure that the tyre changer is discon-
nected from all supply sources.
Note:
Installation of the accessory on the tyre changer may be carried out by manufacturer
qualified and authorised personnel only. Installation by NON-qualified personnel implies
the loss of the warranty on the performance of the device.
The accessory can only be installed on tire changers arranged for the assembly of the
respective model (fig.4c)
- Disconnect the electrical and pneumatic connections.
- Demount the side casing of the tyre changer.
- Check whether the machine has the holes needed to mount the accessory.
- Fix the accessory as shown below (fig. 4c):
- Raise the auxiliary device and bring it
into position, then fix it with the upper
screws.
- Insert the thickness spacer supplied
between the casing and the auxiliary
device (b);
- Using the side screws, fix the auxilia-
ry device support to the casing and
bracket, leaving the thickness spacer
in place (b);
- Tighten the screws - first the side ones
and then the upper ones.
12
WARNING
b
4c
User's manual