Switching Off; Temperature Regulation; Frostmatic Function; Dynamicair Function - AEG SCT51800S0 Manual De Instrucciones

Ocultar thumbs Ver también para SCT51800S0:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

1. Pilot Light
2. Temperature Regulator
3. FROSTMATIC light
4. FROSTMATIC switch
5. DYNAMICAIR light
6. DYNAMICAIR switch
Switching on
Insert the plug into the wall socket.
Turn the Temperature setting regulator clockwise to a medium setting.
The pilot light will light up.

Switching off

To turn off the appliance, turn the Temperature regulator to the "O" position.
The pilot light will switch off.

Temperature regulation

The temperature is automatically regulated.
To operate the appliance, proceed as follows:
• turn the Temperature regulator toward lower settings to obtain the minimum coldness.
• turn the Temperature regulator toward higher settings to obtain the maximum coldness.
A medium setting is generally the most suitable.
However, the exact setting should be chosen keeping in mind that the temperature in-
side the appliance depends on:
• room temperature
• how often the door is opened
• the quantity of food stored
• the location of the appliance.

FROSTMATIC function

You can activate theFROSTMATIC function by pressing the FROSTMATIC switch.
The FROSTMATIC light will light up.
This function stops automatically after 52 hours.
It is possible to deactivate the function at any time by pressing the FROSTMATIC switch.
The FROSTMATIC light will switch off.

DYNAMICAIR function

You can activate the DYNAMICAIR function by pressing the DYNAMICAIR switch.
The DYNAMICAIR light will light up.
It is possible to deactivate the function at any time by pressing the DYNAMICAIR switch.
The DYNAMICAIR light will switch off.
29
Control panel

Capítulos

Tabla de contenido
loading

Tabla de contenido