AEG S73800KMM0 Manual De Instrucciones página 15

A
2
h1 h2
h4 h5
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cab-
inet.
• The door opens and closes correctly.
Remove the clip-in ventilation grille, re-
f
move the plug (e) from the ventilation
grille and install it on the opposite side.
Remove the bottom hinge (A) by un-
screwing the fixing screws.
Remove the door.
A
Unscrew the pin (f) of the bottom hinge
and install it on the opposite side.
e
Unscrew the pin of the upper hinge and
install it on the opposite side.
Install the door in the upper hinge.
Install the ventilation grille, clipping it in-
to place.
1
Remove the handle. Unscrew the top
h3
handle bracket from the handle rod (h1).
Unscrew the bottom handle bracket
from the door (h2). Unscrew the top han-
dle bracket from the door (h3).
Install the handle in the opposite side.
h6
Re-screw the handle bracket on the door
(h4). Turn the handle bracket with the
handle and screw them to the door (h5)
and the fitted handle bracket (h6).
Make sure that the front board of the
door is parallel to the front board of the
top.
Reposition, level the appliance, wait for
at least four hours and then connect it to
the power socket.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly
to the cabinet. In that case, wait for the
natural fitting of the gasket.
ENGLISH
15