Inspection & Maintenance - Goodyear GOD2112 Manual De Instrucciones

tripped
Pump does not 1. Water inlet filter is clogged
reach necessary 2. Pump is sucking air from hose
pressure connections
3. Nozzle is worn or not correct
size
4. Unloader is clogged or Worn
5. Valves is clogged or worn
Fluctuating 1. Pump is sucking in air
Pressure
2. Clogged nozzle
3. Valves dirty, worn of stuck
4. Water seals worn
Motor stops 1. Extension cord is too long or
suddenly wire size too small
2. Thermal safety switch has
tripped due to overheating
INSPECTION & MAINTENANCE
For safety use, make sure a three-month clean the machine. Before working, make sure
inspect the filter and the nozzle, make sure there is no impurity. After working, make sure
there is no water in the pump and the hose.
If the machine need to be repaired in the guarantee period, please return the machine to
the shop. You need to provide the certificate of purchase in order to repair or get the
substitute.
Before Packaging, The machine should be cleaned, then use closed packaging,
motor to cool down
1. Clean water inlet filter
2. Check that connections and
locking ring are properly
tightened
3. Call the dealer
4. Call the dealer
5. Call the dealer
1. Check that hoses and
connections are tight
2. Clean with tip cleaner(see
page 8)
3. Call the dealer
4. Call the dealer
1. Remove extension cord(see
page 4.)
2. Check that main supply
voltage age corresponds to
specifications