Flow Switch; Warning And Alarm Messages (N-Bssalt) - BSV BS POOL N-BSSALT Manual De Usuario

4.1.5.5 – Flow switch
The flow sensor detects whether or not there is water flow in the piping. If it
detects that there is no flow, the production will stop, and an alarm will sound
accompanied by a red warning LED. Once the flow has been reestablished, the
equipment will return to normal operation.
The "Flow Kit" is necessary to activate the flow sensor, which is done by
pressing OK in the menu Flow Switch = Y.

4.2- Warning and alarm messages (N-BSSALT)

In the event of an abnormal situation in the operation of the equipment, it will
inform you through an alarm (the equipment cannot operate under these
conditions and gives an acoustic and visual alarm) or a warning (the
equipment cannot continue operating and corrective action is required)
Messages will be displayed through LEDs as indicated in the following figure:
Warning message example:
Alarm message example:
34 / 57
N-BSSALT V3.0