7. INSTALLATION
QUADRO VINO has been designed to be hung on a wall. It is necessary to x two hooks on the wall by using the appropriate plugs
for the type of wall in question (perforated brick , concrete, drywall etc.) and depending on the weight it can support (specified on
plugs). The manufacturer declines any liability in regards to product installation.
The following plan illustrates how far apart the two plugs should be installed (D). Height (H1) as indicated in the diagram refers
to the suggested height to drill the plug holes (this may vary according to speci c needs). Height (H2) refers to the power socket
position.
D
QV12
470 mm
100 - 240 V
155 mm
TEMPERATURE SETTING, USE AND OPERATION
To start refrigerating, press the main switch on the top panel of QUADRO VINO.
QV12 is a chiller and it has not a preservation function.
The inside temperature varies from +4 °C to +10°C depending on the ambient temperature. QV12 should not be used with
ambient temperature lower than +18 °C.
We suggest to turn off the Quadro Vino when not in use.
Defrosting cycle is runned by means of an electronic card that stops the refrigeration system for 15 minutes every 3 hours
operation.
To ensure a longer life of the LED light it is recommended to switch off the light when not needed.
The light switch is located on the left side of the case.
QV30
470 mm
70 mm
100 - 240 V
• Hang Quadro Vino by setting the hooks in the slots on the back of the case.
• Insert the plug in the socket (see safety electrical system).
• Assemble the door following the instructions given in point 6 of the general information.
TEMPERATURE SETTING, USE AND OPERATION
• To start refrigerating, press the main switch on the top panel of QUADRO VINO.
In the NON REFRIGERATED model the main switch turns on and o the light (not timed).
• The electronic card has a delta of 2 °C so that if the set temperature is 12 °C the system will stop once it reaches the set
temperature of 12 °C.
and will start again as soon as the temperature reaches the 14 °C.
• Lights will automatically turn o 12 hours after switching on.
D
• Hang Quadro Vino by setting the hooks in the slots on the
back of the case.
• Insert the plug in the socket (see safety electrical system).
• Assemble the door following the instructions given in point 6
of the general information.
QV40
QV52
70 mm
100 - 240 V
ENGLISH
D
650 mm