Before Using The Appliance The First Time; Assembly Of The Glass Container; Assembly Of The Beverage Containers - Unold 78685 Instrucciones De Uso

BEFORE USING THE APPLIANCE THE FIRST TIME

1. Remove all packaging materials
and any transport safeguards.
Keep packaging
away from children - danger of
suffocation!
2. Before using the appliance for the
first time, carefully clean all parts

ASSEMBLY OF THE GLASS CONTAINER

1. Place the sealing ring in the lower
edge of the blade unit.
2. Connect the blade unit with the
underside of the glass container,
by fitting on the blade and unit it
clockwise.
3. Place the glass container on the
motor block and turn the glass
container clockwise until it locks
in place.

ASSEMBLY OF THE BEVERAGE CONTAINERS

1. Remove the lid of the desired
beverage container.
2. Pour the ingredients into the
container.
CAUTION:
Do not exceed the maximum
fill quantity of 300 ml (small
beverage container) or 500 ml
(large beverage container)!
3. Place the sealing ring in the lower
edge of the blade unit.
22
of the appliance (see chapter,
„Cleaning and care").
materials 3. Ensure that the control dial is in
the AUS/OFF/0 position
4. Uncoil the required power cord
length and plug the mains plug
into an electrical outlet.
4. Pour the ingredients into the
container.
5. Then press the lid onto the glass
container.
6. Now screw the measuring cup
clockwise into the opening.
4. Connect the blade unit with
the underside of the beverage
container, fitting on the blade
unit and turning it clockwise.
5. Place the beverage container on
the motor block with the opening
downward and turn the beverage
container clockwise until it locks
in place.
Copyright UNOLD AG | www.unold.de
CAUTION:
Do not exceed the maximum fill
quantity of 800 ml!