Toshiba TEC B-570-QP Serie Manual De Instrucciones página 24

10. GENERAL MAINTENANCE
Cleaning the Cutter Unit
1. Be sure to turn the power off before cleaning the cutter unit.
2. The cutters are sharp and care should be taken not to injure yourself when cleaning.
1. Loosen two screws and remove the cutter cover.
2. Remove the white screw and media guide.
3. Remove the jammed paper and trash.
4. Clean the cutter with dry cloth.
White Screw
(24741710304)
Cutter Cover
5. Assembling is reverse order of removal.
Auto Ribbon Saving Mode
Auto ribbon saving function is activated when it is selected by DIP switch (Refer to page 4-1) and no
print area extends more than 20 mm.
NOTE: According to the relation between the outer diameter of rewound ribbon and print speed, ribbon
loss per saving varies as follows:
WARNING!
Media Guide
Screw
Print speed
Ribbon loss
3"/sec. Approx. 5 mm
5"/sec. Approx. 8 mm
8"/sec. Approx. 17 mm
E10-3
ENGLISH VERSION EM1-33031
Fixed Cutter
Cutter Unit
Swing Cutter
10.3 Removing Jammed Paper
Fig. 10-3