Specific Safety Rules - Makita BO4553 Manual De Instrucciones

ENGLISH
1 Lever
2 Clamper
3 Punch plate
4 Abrasive paper
5 Guide
6 Velcro sandpaper
7 Base
SPECIFICATIONS
Model
Pad size 116 mm × 104 mm
Orbits
per minute
Dimensions 120 × 112 × 137 (mm)
Net weight
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for the sanding of large surface of
wood, plastics and metal materials as well as painted
surfaces.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
Safety hints
For your own safety, please refer to the enclosed safety
instructions.

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to sander safety rules. If you use this tool unsafely or
incorrectly, you can suffer serious personal injury.
1. Hold power tools by insulated gripping surfaces
when performing an operation where the cutting
tool may contact hidden wiring or its own cord.
Contact with a "live" wire will make exposed metal
parts of the tool "live" and shock the operator.
2. Always use safety glasses or goggles. Ordinary
eye or sun glasses are NOT safety glasses.
3. Hold the tool firmly.
4. Do not leave the tool running. Operate the tool
only when hand-held.
5. This tool has not been waterproofed, so do not
use water on the workpiece surface.
6. Ventilate your work area adequately when you
perform sanding operations.
4
Explanation of general view
8 Plate
9 Dust bag
10 Hole
11 Entry port
12 Protrusion
13 Dust spout
14 Groove
BO4553
116 mm × 104 mm
14,000
122 × 114 × 137 (mm)
1.0 kg
BO4554
112 mm × 190 mm
14,000
209 × 112 × 135 (mm)
1.0 kg
7. Some material contains chemicals which may be
toxic. Take caution to prevent working dust inha-
lation and skin contact. Follow material supplier
safety data.
8. Use of this tool to sand some products, paints
and wood could expose user to dust containing
hazardous substances. Use appropriate respira-
tory protection.
9. Be sure that there are no cracks or breakage on
the pad before use. Cracks or breakage may
cause a personal injury.
SAVE THESE INSTRUCTIONS.
WARNING:
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.
OPERATING INSTRUCTIONS
Attaching abrasive paper
CAUTION:
GEB021-1
Always be sure that the tool is switched off and
unplugged before installing or removing the paper.
Model BO4553 (Fig. 1 & 2)
Raise the lever. Insert the paper end into the clamper,
aligning the paper edges even and parallel with the sides
of the base. (Prebending the paper makes attachment
easier). Once the paper is in place, return the lever to its
original position.
Repeat the same process for the other end of the base,
maintaining the proper paper tension.
CAUTION:
After inserting the paper, make sure the teeth of the
clamper hold it securely. Otherwise the paper will be
loose and subject to slippage, resulting in uneven sand-
ing operation.
Hold the tool with the paper surface facing up. Place the
punch plate over the paper so that the bent sides of the
punch plate are flush with the paper edges. Then press
the punch plate to make holes in the paper.
15 Front fixing cardboard
16 Front side of paper dust bag
17 Claws
18 Upper part
19 Notch
20 Guide
21 Switch
BO4561
100 mm × 164 mm
14,000
187 × 100 × 137 (mm)
1.0 kg
BO4563
14,000
1.0 kg