Switching The Ft6381 To Connect With The Android™ Handset; Using The Ft6381 Communication Software (Second And Subsequent Use) - Hioki FT6380 Manual De Instrucciones

48
2.5 Convenient function
Using the FT6381 Communication Software
(second and subsequent use)
After turning on the FT6381, launch the FT6381 Communication
Software on the Android™ handset. If you wish to use the map
function, enable the GPS function. Once the instrument has
been paired, it will connect automatically, and FT6381 measured
values will be sent to the Android™ handset in real time. The
instrument will not be able to connect to the handset if it has not
been paired. Refer to "Pairing the instrument with an Android™
handset (first use only) (p.44)" to pair the instrument.
Switching the FT6381 to connect with the
Android™ handset
If you have multiple FT6381 instruments and wish to change the
unit to connect to the handset, press the Settings button after
pressing the menu button on the Android™ handset and recon-
figure the Bluetooth
If you are unable to establish a Bluetooth
Check the following if you are unable to establish a Bluetooth
connection between the FT6381 and the Android™ handset:
• Is the Bluetooth
handset and the FT6381?
• Has the FT6381 in question been paired on the Android™
handset's Bluetooth
not been paired, refer to "Pairing the instrument with an
Android™ handset (first use only) (p.44)" to pair it.
®
device settings.
®
function enabled on both the Android™
®
settings screen? If the instrument has
®
connection
®