Time Measurement / Stopwatch; Dimmer Function; Carum Battery - Ardo CARUM Instrucciones De Uso

en

5.3.6. Time measurement / Stopwatch

The time measurement starts with switching on the Carum and is
displayed in the information ribbon.
• The time measurement is stopped by pressing the Time button once.
• By pressing the Time button again, the clock is reset to 00:00.
• Pressing the Time button again starts the time measurement once
more.
The time measurement is retained when changing modes but is reset to
00:00 when the Carum is switched off.

5.3.7. Dimmer function

The brightness of the display can be reduced by pressing the Dimmer
button once; at the same time the light bulb symbol in the information
ribbon fades out. By pressing the button again the display returns to its
normal brightness.

5.3.8. Carum Battery

The Carum Battery with its integrated battery unit is identified on the
front panel by "BATTERY".
The battery unit charge status is displayed as a battery symbol in the
information ribbon. During recharging, the bars move from left to right
until the battery unit is fully recharged.
12
CARUM
02:00
Vacuum Cycles
CARUM
02:00
Vacuum Cycles
CARUM
BAT TERY
10:00
Vacuum Cycles