Air Filter; Checking Muffler And Spark Arrester - Powermate PM0152000 Manual Del Operador

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Air Filter

A dirty air filter will reduce the life span of the engine, make it difficult to start the
engine, and reduce the unit's performance. Replace with new filter annually.
To clean, remove the screws then remove outer casing.
Remove the screws then remove air filter cover.
Remove the foam element.
Wash the foam element in solvent and let dry.
Pour a small amount of oil on the foam element then squeeze out, but do not
wring out excess oil. Foam element should be damp, but not dripping.
Reinsert the foam element into the air filter case.

Checking Muffler and Spark Arrester

Inspect muffler for crack,
corrosion, or other damage.
Remove screws, then remove the
muffler cover as shown.
Loosen bolt, then remove muffler
cap, muffler screen, and spark
arrester.
Check the muffler screen and
spark arrester for carbon deposits.
Remove carbon deposits with a
wire brush.
Check the muffler screen and spark arrester for
damage. If damage, replace with parts
specifically designed for this unit.
Install the spark arrester. Align the spark
arrester projection with the hole in the muffler
pipe.
Install the muffler screen and muffler cap.
Install the outer casing and tighten the screws.
English
MAINTENANCE
MAINTENANCE
Do not run the generator without reinstalling the
foam element or excessive piston and cylinder wear
may result.
Avoid contacting hot surfaces on this unit.
The muffler, engine and other parts can be
extremely hot.
Allow hot components to cool before touching.
17
Customer Hotline 1-800-445-1805
Tabla de contenido
loading

Tabla de contenido