Idiomas disponibles
Idiomas disponibles
If the procedure was successful you will be able to see the image
from the device on the screen and the Online status.
Notes:
●
Use Smartlink option only after powering the device
Because of the complex auto-configure procedure and interferences you
●
will maybe need to try the procedure a few times before succeeding Start
the procedure again after resetting the device.
●
Smartlink option does not support Wi-Fi 5G
Reset procedure: press the reset button for 10-20 then wait 60 sec for the
device to restart.
LAN connection method :
●
Power the outdoor unit
●
Connect the outdoor unit to the local LAN network (trough a router or
switch) using an ethernet cable
●
Make sure the phone is connected to the same network as the outdoor unit
(wireless router).
●
Open App on phone
The app will look and find the devices in the same network automatically
●
Select the device
●
Press + button to add the device then insert a name for it and it's access
password (default password is 123123). Select "Save".
●
If the procedure was successful you will be able to see the image from the
device on the screen and the Online status.
Note: Repeat the procedure if it did not work.
19
E
N
