Speed 2 button
With LED on (speed 2 already running):
• Nothing will happen when this key is pressed. To switch the hood off firstly select speed 1, then press the "speed 1 button" again.
With the LED off and a speed on:
• Press the key (long or not) to set the hood on speed 2. When speed 2 is running the relative LED will light up.
With the LED off and NO speed on:
• Nothing will happen when this key is pressed.
Speed 3 button
With LED on (speed 3 already running):
• Nothing will happen when this key is pressed. To switch the hood off firstly select speed 1, then press the "speed 1 button" again.
With the LED off and a speed on:
• Press the key (long or not) to set the hood on speed 3. When speed 3 is running the relative LED will light up.
With the LED off and NO speed on:
• Nothing will happen when this key is pressed.
Speed 4 button
With LED on (speed 4 already running):
• Nothing will happen when this key is pressed. To switch the hood off firstly select speed 1, then press the "speed 1 button" again.
With the LED off and a speed on:
• Press the key (long or not) to set the hood on speed 4. When speed 4 is running the relative LED will start flashing; the 4th, or inten-
sive, speed is timed and after approximately 7 minutes the motor will automatically switch to 3rd speed.
With the LED off and NO speed on:
• Nothing will happen when this key is pressed.
Light Button
Light:
• By briefly pressing the key (the back-lit button), you turn the light on and off.
LIGHTING
The hood has fluorescent lamp lighting.
If the lamp ever needs to be replaced:
•
Q
Phase
page 9
• remove the covering element (N) (Fig.
• take out the blown fluorescent tube (M) (Fig.
• put in a new fluorescent lamp by performing, in reverse order, the operations described in Fig.
The new fluorescent lamp must be identical to the old one!
• put the covering element back in (N) performing, in reverse order, the operations described in Fig.
• connect the appliance back up to the electrical power mains.
disconnect the appliance from the electrical mains power supply by unplugging it or turning off the main switch;
1
2
and
);
3
4
and
);
3
and
24
4
;
1
2
and
;