Maintenance And Cleaning - Vortice NORDIK STORM 61/24” Manual De Instrucciones

ENGLISH
HOW TO ADJUST AIRFLOW UPWARD OR DOWNWARD
Tilt fan head to the desired angle. This high velocity fan can be used alone or in conjunction with air
conditioning. Rotating the fan head upward serves to pull air from the floor and circulate It throughout the entire
room.
HOW TO ADJUST TILT
Disconnect the power supply
1. Turn both knobs on the sides of the fan counterclockwise.
2. Tilt the fan to the desired position.
3. Tighten both knobs clockwise.
2
1

Maintenance and cleaning

Unplug from electrical supply source before cleaning. Use soft damp cloth to clean. Then wipe with dry choth.
Do not use a cleaning solution that is harmful to paints or plastics. Do not bend the blades. The motor bearings
are permanently sealed and do not require additional lubrication.
This product may be hazardous to small Children; mentally,or physically impaired people. Adult supervision of
this product is strongly suggested. Please require all operators to read and follow the instructions of operation for
this product, to insure proper understanding and training of how to operate this piece of equipment.
Do not allow any unsupervised operation by a non-trained adult.
Inspect the units periodically. Repair or replace damaged or worn parts. Use original Vortice spare parts during
maintenance.
WARNING: Only qualified service personnel can repair the instrument. An improperly repaired unit can present
a danger to the user.
2 3
9