Tabla de contenido
Idiomas disponibles
Idiomas disponibles
HOW TO USE THE BLENDER (REFER TO THE FIGURE)
1.
Before inserting the Jar(C) to the housing, make sure the power cord is unplugged from the
power outlet and the knob is in "0" position.
2.
On a work surface, remove the Cap(A) from the Jar lid(B) by turning the Cap counterclockwise
and fix it by turning the Cap clockwise
3.
When set the Jar lid onto the Jar , tilt the Jar lid to the handles of the Jar and inset it to the Jar ,
then press down it to impact into the Jar.
4.
When set the Speed selector(F) to "2"position through turning it clockwise, it means high speed.
5.
When set the Speed selector to "1"position through turning it clockwise, it means low speed.
6.
Turn the Jar clockwise and remove it from the Base(E). Turn the Jar counterclockwise and fix it
on the base.
7.
Wash ingredients well and cut into suitable piles to fit into the feeding hole. Add the foods or
beverages into the Jar through feeding hole. The Jar has a capacity of 1.7 liters. Do not overload the
Jar at a time; NEVER RUN EMPTY THIS MAY BURN THE MOTOR.
8.
Turn the Speed selector to "1" or "2" position and within repeat the operation until desired results
are reached.
9.
The pulse level gives you fingertip control over short food processing jobs, when turn the Speed
selector to pulse, the machine will run at high speed .
10.
Turn to "0" to stop the machine.
Notes:
- The appliance is only permitted to use 1 min for 1 time. Before it's used again, it must cool down
enough.
- Turn the knob (Speed Selector) to "0" position once the blender is completed and unplug the cord
from the wall outlet.
- This appliance can also mix little ice and menu such as carrot vegetable.
1. Unplug the appliance from wall outlet before cleaning.
2. The cap, the jar lid, the jar and the blade can be washed under running water.
3. Wipe over the outside surface with a damped cloth and polish with a soft dry cloth.
4. Wipe any excess food particles from the power cord.
Caution: Never immerse the Motor unit or power cord into water for cleaning. It must only be
wiped with a damp cloth.
DISPOSAL:
Do not dispose this product as unsorted municipal waste. Collection of such waste
separately for special treatment is necessary.
Cleaning
P-3
Tabla de contenido
