Operation - Unold TURBO Instrucciones De Uso

oPEraTIoN

(NOTE: Numbers refer to Product Diagram, P:6)
i. Grasp Lid Handle(1) and Open lid into locked open position(3), place desired
accessory (Rack(8), Rotisserie Spit(9) / Basket(5) / Skewer(7)) and food into
cooking position.
Ii. Release the lid lock(3) and close the lid
iii. Connect the plug to a suitable wall socket
FoR iMMeDiate cooKinG oPeRation
Step J1: Press START/STOP(A) to switch on the product display / enter STANDBY
mode.
Step J2: Set the FOUR(4) appliance functions(Cooking Time, Temp, Fan Speed,
Rotisserie) as desired using one of 2 methods:
MANUAL: Using the MANUAL(C) keys, set each function as desired.
AUTO: Press on AUTO(B) until the desired program is displayed (NOTE: You
may also adjust the settings for any program by using the MANUAL(C) keys)
Step J3: After completing settings, press on START/STOP(A) to initiate cooking.
Heating will commence immediately, with operating temperature(E1), remaining
time(E2) and Fan Speed(E3) displayed continuously.
FoR tiMeR-contRolleD(tc) cooKinG MoDe (1 minute - 12 hrs advance programming)
Step T1: Press START/STOP(A) to switch on the product display.
Step T2: Press TIMER(D) to enter TC Mode, causing the default „30" minutes
to be display on the TIMER display.
Step T3: Adjust the timer using the TIME CONTROL(C) „+" and „-" keys (Press
quickly for small time adjustments, Press & Hold for large time adjustments)
Step T4: Press on AUTO(B) until the desired program is displayed, then adjust
the settings as needed by using the MANUAL(C) keys.
Step T5: Within 4 seconds, the display will revert for press on START/STOP(A)
to initiate cooking.
When the countdown reaches ZERO(O), heating will commence, and operating
temperature(E1), remaining time(E2) and Fan Speed(E3) will be continuously
displayed.
Copyright UNOLD AG | www.unold.de
27