Operating Instructions Contact E und Contact E duo/hot
1.
General:
1.1. Product designation:
1.2. Scope of delivery:
Contact E
1 Handpiece with connecting cable
1 Handpiece Clamp
1 Modelling tips PKT 2
1 Power supply unit
1.3. Manufacturer address:
1.4. Warenzeichen - Vermerke:
1.5. Performance features: Mains voltage :
1.6. Installation and storage conditions:
2. Use as intended:
Our Contact E and Contact E hot serve exclusively for the processing of modelling waxes, which
are intended for dental technology. Not approved for use on humans! All warranty and liability claims
will become void if the device is not used as intended!
Contact E, Contact E duo and Contact E hot are used as modelling stations for waxes. The wax chips adhere
magnetically to the metal plate and are protected by a transparent dust cover. The left half of the metal plate is
heated with a fixed temperature and can be switched on or off separately. Contact E and Contact E duo
additionally contain 1 or 2 handpiece connections on the device. These can be regulated continuously and
separately
3. Risks and dangers in the application:
1.
ensure that persons not familiar with the equipment (e.g. children) do not come into contact with the
equipment Only dental technicians or persons authorized and instructed by the laboratory owner are
authorized to work with our units. Before starting up the Contact E units, the
Technicians should read the operating instructions and contact the manufacturer if they are still unclear.
2.
operate the equipment only in dry workplaces, clean only dry and do not place in water-filled containers.
3
Caution: Danger of burns when touching the heating rod and the modelling probes.
4.
do not cover/pack the unit when heated.
Document:
Created on/by:
BA
04.06.2020/TB
Contact E
Contact E duo
Contact E hot
Contact E duo
2 Handpieces with connecting cable Contact mit
2 Handpiece Clamps
2 Modelling tips PKT1 + PKT 2
1 Power supply unit
YETI Dentalprodukte - Industriestraße 3 - D-78234 Engen
Tel.: +49-7733-9410-0
further operating instructions and declarations of conformity
Patent
Mains frequency:
type / mains plug:
Power consumption:
Protection class:
- set up horizontally
- store dry at room temperature
- Protection against acids and alkalis
modified on/by:
09.10.2017/ST
230 V / 115 V
416-1000
230 V / 115 V
416-2000
230 V / 115 V
416-0000
FAX: +49-7733-9410-22
100-240V +\- 10%
50/60 Hz
German/Euro
9-12 W
Protective Insulation
Revision:
released on/by:
0
09.06.2020/QM
Contact E hot
Dust cover
and power supply unit
Page number:
Seite 1 of 4