Playing Music Via Usb - AEG SR 4362 Instrucciones De Servicio

English
32
3. Insert an audio CD with the printed side facing upwards
on to the central cone so that the CD clicks into place
and then close the lid of the CD compartment.
4. After a few seconds the total number of songs/tracks is
shown in the display.
5. The CD will play from the first title. The current track will
be displayed.
NOTE: During MP3 playback:
• The current track and the folder will alternate on the
display.
• When selecting another folder, "001" will appear
indicating the first track in the folder.
6. In order to remove a CD, please press the STOP button
(11), open the CD compartment and lift the CD out care-
fully.
Always keep the CD deck closed.
NOTE:
• If a disc is inserted the wrong way around, respectively
if no disc is inserted, then the message "- - -" will blink
and " " appears on the display.
• Playback of CDs produced by the user cannot be
guaranteed due to the large variety of software and CD
media available.

Playing music via USB (9)

This device has been developed in line with the latest techni-
cal advances in the USB field. The wide range of different
USB storage devices of all types which are currently on the
market, unfortunately do not allow us to guarantee full com-
patibility with all USB storage devices. For this reason, in rare
cases there may be problems in playing back files from USB
storage devices. This is not a malfunction of the device.
1. Set the function switch (14) to the "CD/USB/AUX IN"
position.
2. Connect a USB storage device directly into the port.
Playback will automatically start after a few seconds.
For operation, please refer to the section "Description of the
control buttons".
NOTE:
• Always directly connect a USB storage medium to the
USB port to prevent any malfunctions.
• The USB port is not designed for charging external
devices.
• If CD is inserted: Remove the CD or briefly press
and hold the PLAY/PAUSE button (6) to switch to USB
mode.
• If an audio cable is connected to the AUX IN socket,
the device cannot be operated in USB mode.
CAUTION:
Switch the device to a different operating mode before you
remove the USB storage device.
Description of the control buttons
PLAY/PAUSE (6)
You can briefly interrupt and resume playback using this
button. The notification on the display flashes. Pressing again
continues playback.
Briefly press and hold this button during CD/USB mode will
allow you to switch between CD and USB operation.
/ (8)
With you can jump to the next or previous track etc.
• If the button is kept pressed down, the machine starts to
search through the tracks.
The button can be used as follows:
Press once = This starts the current track again from
the beginning.
Press twice = This jumps back to the previous track.
Press three times = This plays the song before etc. If the but-
ton is kept pressed down, the machine
starts to search through the tracks.
STOP (11)
The playback is stopped.
MODE (10)
• In stop mode for programming any order of tracks (see
the section on "Programmed Play").
During the playback of an audio CD:
Press once = the current track is repeated continu-
ously. The symbol "
the display. Press twice = the whole CD is played continuously.
The symbol "
the display.
Press three times = All the music tracks are played back in
random order. The notification "RAND"
appears on the display.
Press four times = all functions are cancelled. The normal
play mode is resumed.
During playback of MP3 music:
Press once = the current track is repeated continu-
ously. The symbol "
the display.
Press twice = the selected folder is repeated continu-
ously (
display).
Press three times = all music titles are repeated continuously
(The symbol "
the display.).
Press four times = All the music tracks are played back in
random order. The notification "RAND"
appears on the display.
Press five times = all the functions are deactivated. Play-
back is continued normally.
" appears on
ALL" appears on
" appears on
ALBUM appears in the
ALL" appears on