Erreka MAGIC Manual Del Instalador página 54

INSTALLATION
Position the base of the box section
Position the top post plate with rubber seal
50
Installation manual
1 Position the base of the box section (1) on the base
plate (2).
2 Position in the hanging style (3) on the base of the
profile (1), ensuring that the drag wheel (4) of the
operator fits correctly on the bottom hinge (5) of the
base plate.
3 Attach the base of the profile (1) to the hanging
style of the gate (3) using the screws (6).
1 Attach the top post plate with rubber seal (1) to the
hanging style of the gate (2) using the screws (3).

The hanging style in iron gates has a ridge.
Check the position of the ridge in order to correctly
position the top post plate with rubber seal (the
groove of the support should coincide with the ridge
of the hanging style).
2 Check that the two O-ring seals (4) are positioned
on the bottom hinge (5).
3 Position the top hinge (5).
4 Gland adjustment (6).