Description; Purpose; Product Overview; Safety - GreenWorks GD40BC Manual Del Operario

EN
1

DESCRIPTION

1.1

PURPOSE

This machine is used to cut grass, light weeds, and other
similar vegetation at or around ground level. The cutting
plane must be approximately parallel to the ground surface.
You cannot use the machine to cut or chop hedges, shrubs,
bushes, flowers and compost.
1.2

PRODUCT OVERVIEW

Figure 1-18 .
Battery compartment
1
Rear handle
2
Lock-out button
3
Speed button
4
On/off button
5
Trigger
6
Lock latch
7
Auxiliary handle
8
Upper shaft
9
Coupler
10
Lower shaft
11
Guard
12
Blade
13
Trimmer head
14
Cut-off blade
15
Guard cap
16
Release button
17
Positioning hole
18
Knob
19
Lower clamp
20
Battery release button
21
Cut-off blade
22
Spool cover
23
Spool
24
Bump knob
25
Hole
26
Slot
27
Guide slot
28
Metal rod
29
Spacer
30
Inner cup
31
Blade
32
Outer ring-nut
33
Outer cup
34
Nut
35
Direction of roatation
A
Best cutting area
B
Dangerous cutting area
C
English
2

SAFETY

Make sure that you do/obey all safety instructions.
Refer to Safety Manual.
3

INSTALLATION

Remove the battery pack from the machine before
installation.
Do not use accessories that are not recommended for this
machine.
3.1

UNPACK THE MACHINE

Make sure that you correctly assemble the machine before
use.
• If the parts are damaged, do not use the machine.
• If you do not have all the parts, do not operate the
machine.
• If the parts are damaged or missing, speak to the service
center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with local
regulations.
3.2

ATTACH THE GUARD

Figure 2.
Do not touch the cut-off blade.
1. Remove the screws from the trimmer head with a Phillips
screwdriver (not provided).
2. Put the guard onto the trimmer head.
3. Align the screw holes on the guard with the screw holes
on the trimmer head.
4. Tighten the screws.
5. Put the guard cap onto the guard.
6. Align the screw holes on the guard cap with the screw
holes on the guard.
4
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING