Disposal; Maintenance; Precautions; Cleaning And Storage - Snuza HALO Manual De Instrucciones

3. Remove the depleted battery.
4. Insert the new battery, ensuring that the polarity is correct
(align the positive end '+' of the battery with the '+' symbol in
the battery housing, as indicated). Replace the Battery Cover
and ensure that it is correctly closed.
Do not use the monitor without the Battery Cover in place.
5. Test the unit by switching on and ensuring that the Battery
Indicator Light (2) flashes green.
6. If the unit starts emitting a beep after the battery has been
replaced, simply press the ON/OFF and MODE/OFF buttons
simultaneously to turn it off.

9.4 Disposal

The battery must be disposed of in accordance with your country's laws governing the
disposal and recycling of batteries.

10. MAINTENANCE

10.1 Precautions

• Do not insert anything into the Sound Emission Hole (2).
• Do not allow any liquid to enter the Sound Emission Hole.
• Avoid bending the sensor unnecessarily (fig 1).
• Do not use undue force to bend the clip (fig 2).
• Do not pull the Battery Cover Release Clip (10) beyond the
Guard Rail (11).

10.2 Cleaning and Storage

• Gently wipe with a damp cloth to remove any dirt.
A mild soap may be used for stubborn dirt.
• Do not use any other cleaning agents as they may contain damaging chemicals.
• The monitor is splash resistant, not waterproof. Do not immerse in water. If it gets
wet, dry it off immediately.
14
3
4
1
2