Tabla de contenido
I Adjusting the audio latency
When using the M-100FX in Advanced mode, you can
change the driver settings to adjust the latency of the
audio. To adjust the latency, change the Buffer Size in
the driver settings dialog box.
1.
As described in Opening the special driver settings
dialog box (p. 167), open the "Driver Settings" dialog
box.
2.
Adjust the driver buffer size.
The following setting will produce the shortest latency.
Windows:
Set "Audio Buffer Size" to the far left (Min).
Macintosh:
Set "Buffer Size" to the far left (Min).
3.
Click [OK] to close the driver settings dialog box.
4.
Restart the application that is using the M-100FX.
If you are using an application that has a function for
testing audio devices, get it to perform its tests.
5.
Play back audio data on your application.
If interruptions occur in the sound, repeat this
procedure, and gradually increase the buffer size
specified in step 2 until interruptions no longer occur.
* Depending on the application you are using, there may be a
buffer size or latency adjustment function among the audio
settings of the application as well. For details, refer to the
operation manual for your application.
Opening the special driver settings dialog box
If using Windows:
1.
Open the "Control Panel" and double-click "EDIROL M-100FX".
2.
The "EDIROL M-100FX Driver Settings" dialog box will appear.
* In Windows XP, click "Switch to classic view" to switch the display to the classic view. EDIROL M-100FX will not be displayed
unless the classic view is selected.
* In Windows Me, click "View all Control Panel options".
If using Macintosh:
Open the ASIO Control Panel from the Audio Settings dialog box of your ASIO-compatible application. The name of
the Audio Settings dialog box and the procedure for opening the ASIO Control Panel will differ depending on your
application. For details, refer to the operation manual for your application.
Using Advance mode
I Using ASIO Direct Monitor
If you are using the M-100FX in Advanced mode from
an ASIO 2.0 compatible application, the M-100FX's Input
Monitor select switch can be controlled from your
ASIO 2.0 compatible application.
1.
As described in Opening the special driver settings
dialog box (p. 167), open the "Driver Settings" dialog
box.
2.
Make the following settings.
Check the "Use ASIO Direct Monitor" check box.
3.
Click [OK] to close the driver settings dialog box.
* Depending on your application, there may also be an ASIO
Direct Monitor setting among the audio settings of your
application. For details, refer to the operation manual for your
application.
* When using ASIO Direct Monitor, monitoring may switch
on/off at unexpected times, depending on the application
settings and on the recording procedure. If this occurs,
uncheck the check box in step 2 to disable ASIO Direct
Monitor.
167
Tabla de contenido
