Tabla de contenido
Macintosh users
1.
With the M-100FX disconnected, start up Macintosh.
Disconnect all USB cables except for a USB keyboard and USB mouse
(if used).
2.
Exit all currently running software (applications).
If you are using a virus checker or similar software, be sure to exit it as well.
3.
After starting up Mac OS, select Apple System Profiler from the Apple
menu.
The "Apple System Profiler" dialog box will appear.
fig.05-35e_60
4.
Click the Devices and Volumes tab.
5.
Place the M-100FX's ADVANCE (mode select) switch in the OFF position.
fig.advance-off
Advanced mode is off
6.
Use the USB cable to connect the M-100FX to your computer.
1. With the power switch turned OFF, connect the AC adaptor to the
M-100FX.
2. Connect the AC adaptor to an electrical outlet.
3. Use the USB cable to connect the M-100FX to your computer.
7.
Set the M-100FX's power switch to the ON position.
8.
Wait for approximately five seconds.
The M-100FX will use the driver included with Mac OS.
While you are waiting, the screen display will not change, but the M-100FX
is being detected. Do not touch the mouse or keyboard.
Connecting the M-100FX to your computer
Once the connections have
been completed, turn on
power to your various
devices in the order
specified. By turning on
devices in the wrong order,
you risk causing
malfunction and/or
damage to speakers and
other devices.
Always make sure to have
the volume level turned
down before switching on
power. Even with the
volume all the way down,
you may still hear some
sound when the power is
switched on, but this is
normal, and does not
indicate a malfunction.
135
Tabla de contenido
