Operating The Device; Maintenance And Care - AL-KO Hydrocontrol Manual De Instrucciones

Switching off manometric switch
1. Remove mains plug from the socket.

Operating the device

Start up the device as described (Initial start-up).
The manometric switch is electronically con-
trolled and works automatically after initial start-
up.
Manual restart
1. After failures, or if no water is conveyed
during initial start-up, the pump must be
manually started.
2. Check the suction side of the device and the
water level.
3. Start the pump by pressing the "RESET"
button (8).
4. If, after several unsuccessful attempts, no
water is being conveyed, check the screws
for impermeability and refill the pump.
Operating condition indicators
The operating conditions are indicated with the
aid of control lamps (LED).
"Power" control lamp (5)
Indicates whether the device is connected to the
power supply.
"Failure" control lamp (6)
Indicates that a failure is present.
"On" control lamp (7)
Indicates that the pump is operating.
EN 3

Maintenance and care

Prior to starting all maintenance and care
works, the manometric switch must be
disconnected from the power supply.
Remove the mains plug of the power
cable from the socket.
Frost protection
Protect the manometric switch and the pump
from frost.
Empty the manometric switch and pump and
store such that they are protected from frost.
Disposal
Do not dispose of disused devic-
es with domestic waste!
The packaging, device and ac-
cessories are produced from
recyclable materials and are to be
disposed of accordingly.
RL 2002/96 EG
Translation of original user instructions