Unpacking The Appliance; Instructions For Use - Profi Cook PC-EK 1084 Instrucciones De Servicio

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27

Unpacking the Appliance

1. Take out all the parts carefully out of the pack-
ing.
2. Remove all packaging material such as plastic
films, filler material, cable ties and cardboard.
3. Check the delivery scope for completeness.
4. Check the appliance for any transport damage
in order to prevent hazards.
NOTE:
• If there are any visible signs of transport
damage, contact your dealer immediately.
Do not operate a damaged appliance!
• For protection, a silicone cover is fixed
over the pin on the bottom of the measur-
ing cup. In order to avoid injury, we recom-
mend that the silicone cover is replaced
after use.
5. Clean the device before using it for the first
time as described in "Cleaning and Storage".

Instructions for Use

• The appliance is suitable for preparing:
- 1 - 8 boiled eggs;
- 1 - 4 poached eggs;
- Savory egg custard;
- 1 - 2 small omelettes.
• An electronic timer adjusts the cooking time.
Precise measuring of the amount of water is
not necessary.
Explanation of symbols
Soft-boiled eggs
Soft to medium-boiled eggs
Hard-boiled eggs
The settings are average values for size M eggs.
The hardness of the boiled eggs depends on dif-
ferent factors: size and temperature of the eggs.
With some experience you will quickly find your
preferred settings.
44
Using the poaching inserts
• Slightly grease the inserts with butter or mar-
garine in order to remove the boiled egg more
easily.
• Put a maximum of 2 eggs in one insert.
• Place the poaching inserts on the egg holder.
• Select the setting for hard-boiled eggs.
NOTE:
Always let the savory egg custard cool down
before cutting it into cubes.
Mains cable
Fully unwind the mains cable from the bottom of
the appliance. Use the cable guide.
Electric Connection
1. Ensure that your mains power corresponds to
the appliance's specifications on the type label.
2. Set the control knob to the OFF position.
3. Connect the plug to a properly installed safety
plug socket.
Adding water
• Use the measuring cup provided to add water.
• Fill the water tank with one cup of water for
each cooking cycle.
CAUTION:
Do not add water above the MAX marking in the
water tank! Otherwise the water could boil over.
Turning on the device
Turn the control knob clockwise. The indicator
lamp flashes for several seconds and then an
acoustic signal sounds. The indicator lamp lights
up permanently indicating the heating process.
NOTE:
Any adjustment of the control knob will cause the
timer to be reset and the program to start from
the beginning.
Tabla de contenido

Solución de problemas

loading

Tabla de contenido