Setting The Charge Current - ROBBE POWER PEAK ULTIMATE 2 Manual De Uso

The following voltages are available:
Cell count
1
2
3
4
5
6
ENTERING THE BATTERY CAPACITY
flashes. You can now select the battery capacity in increments of 100 mAh using the '+'
or '-' button. Press the 'ENTER' button again to confirm your selection.
The following capacities are available, according to battery type:
Battery type
NiCd
NiMH
LiPo
Pb (lead-acid)

SETTING THE CHARGE CURRENT

increments of 0.1 A using the '+' or '-' button. Press the 'ENTER' button again to confirm
your selection. The available charge current range is 0.1 A to 5.0 A, although the maxi-
mum current value varies according to the cell count and / or the battery voltage. The
charger's integral processor limits the maximum charge current.
Operating instructions
POWER PEAK ULTIMATE 2
For lead-acid batteries you can select a battery vol-
tage in increments of 2 V per cell using the '+' or '-
' button. Press the 'ENTER' button again to confirm
your selection.
Nominal battery voltage
2 Volts
4 Volts
6 Volts
8 Volts
10 Volts
12 Volts
Press the '+' button to leaf through the screen dis-
play until the arrow indicates Battery Capacity.
Press the 'ENTER' button and the '+' / '-' symbol
Battery capacity
100 - 9900 mAh
100 - 9900 mAh
100 mAh - 20.00 Ah
0,50 Ah - 50 Ah
Press the '+' button to leaf through the screen dis-
play until the arrow indicates Charge Current. Press
the 'ENTER' button and the '+' / '-' symbol flashes.
You can now select the charge current in
The battery capacities are chosen to be
typical of the various battery types.
14
No.
8470