Technical Data - Carat C 2067 Manual De Instrucciones

"TRANSLATION OF THE ORIGINAL INSTRUCTIONS"

Technical data

Voltage:
Power absorbed:
Admissible working conditions:
INTERMITTENT - S3 50%-SERVICE
Rotation speed:
Capacitor:
IP Degree:
Thermal circuit breaker:
Tool:
CONTINUOUS CROWN DIAMOND BLADE
Diameter:
Centre hole:
Max. cutting depth:
Water recirculation pump:
Recommended use:
CERAMIC, SINGLE-FIRED CERAMIC, COTTO
AND MARBLE (max. thickness 20 mm.)
C 2067
Weight:
37 Kg
Tank capacity (min/Max):
12 / 15,5 Lt
Max. cut length:
670 mm
230V 50Hz~
1000W
30 sec. under load running
30 sec. rest
2800 min
18 µF
170°C
WET CUTTING
Ø200 mm
25,4 mm
40 mm
S0 230V 50/60Hz
C 2090
41 Kg
15 / 19,5 Lt
900 mm
C 2067
Max format tile for diagonal cut:
450 x 450 mm
Machine dimensions:
660 x 1070 x h. 1200
The noise level emitted by the machine has been
measured in conformity with the EN3745.
LW standard – SOUND POWER LEVEL = 71.4/0.0
dB(A) /mW(A)
-1
LOP – SOUND
OPERATOR'S POSITION=62.7 dB(A).
54
The measurements were taken without any load
and at the maximum speed using a cutting tool of
diameter 200mm. continuous crown type.
In working conditions the machine has a noise
emission of more than 85 dB(A).
27
C 2090
620 x 620 mm
660 x 1300 x h. 1200
POWER LEVEL AT THE
GB