Description
1a Precision comb for trimming beard and short hair
1b Hair comb for cutting hair *
1c Release buttons for comb
2
Wide trimmer (32 mm)
3
Precision trimmer (16 mm) *
4
Release button precision trimmer *
5
Charge Indicator
6a Lock switch for precision comb
6b Length selector for precision comb
6c Length selector for hair comb
7
On/off switch
8
Special cord set (design can differ)
8a Charging stand *
9
Pouch *
* not with all models
Charging
Recommended ambient temperature for charging is 5 °C to 35 °C.
The battery may not charge properly or at all under extreme low or high
temperatures. Recommended ambient temperature for trimming is 15 °C
to 35 °C. Do not expose the appliance to temperatures higher than 50 °C for
extended periods of time.
• Place the appliance (switched off) in the charging stand or connect it
directly to an electrical outlet via the special cord set (8).
• When charging for the first time or when the appliance is not used for
a few months, leave the appliance to charge continuously for 4 hours
(BT 5050/5030/5010: 8 hours).
• Once the appliance is completely charged, discharge it through normal
use. Then recharge to full capacity. Subsequent charges will take about
1 hour (BT 5050/5030/5010: 8 hours).
• A full charge provides up to 50 minutes of cordless operating time.
This may vary according to your beard growth.
• Maximum battery capacity will only be reached after several charging/
discharging cycles.
Charge Indicator (5)
BT 5090/5070
• The charge indicator shows the battery status.
• The charge indicator blinks green when the appliance is being charged.
12