Technical Data - Bodum 11451 BISTRO Instrucciones De Uso

Ocultar thumbs Ver también para 11451 BISTRO:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 40
CLEANING AND REMOVAL OF THE FILTER
It is important to clean the filter regularly. The filter clips into
the body and can be removed by pulling it upwards from the
body. It can be cleaned by gentle brushing with a soft brush
under running water.
KETTLE CLEAN AND DECALE
Remove scale using either a proprietary de-scaling product
suitable for plastic kettles (following the instructions care-
fully), or citric acid.
We recommend using citric acid as follows:
Boil 0.5l/17oz litre of water, then unplug the kettle and stand
it in an empty sink or bowl. Add 25 gm of citric acid crystals
gradually, then leave the kettle to stand.
As soon as the effervescence subsides, empty the kettle and
rinse it thoroughly with cold water. Wipe the outside of the
kettle thoroughly with a damp cloth to remove all traces of
citric acid which may damage the finish.
Do not use a more concentrated solution. Ensure that the
electrical connections are completely dry before using the
kettle. Citric acid crystals are available at most chemists.
– Failure to de-scale may invalidate the guarantee.
– Never use chemicals, steel wool or abrasive agents to clean
the exterior of the kettle.
– Only clean the appliance using a damp cloth.
– Never immerse the item in water: remember this is an elec-
trical applicant.
Note: Ensure that the mains power supply is switched off
when you are not using the kettle.
Any other servicing should be performed by an authorized
service representative.

TECHNICAL DATA

Nominal voltage EURO
Nominal voltage USA
Nominal power EURO
Nominal power USA
Cord length
Kettle capacity
Certifications
8
220 –240V ~50/60Hz
120V/60Hz
700 Watt
700 Watt
approx. 70 cm/27.5 inch
0.5 liter/17 fl.oz
GS, CE, ETL, CETL
Tabla de contenido
loading

Tabla de contenido