Charging The Battery Pack - Elite CID12 Manual De Usuario

CHARGER
WARNING Before using the battery pack, carefully read all instructions and caution indicators on the
battery pack, the charger and the product that will be used.
NOTE After fully charging the battery pack, the charger will not turn off automatically. The charge indicator
light will remain on until the charger is disconnected from the outlet.
Use only the charger that comes with the product, or the direct substitute indicated in this manual. Do not
replace it with any other charger. Use only chargers recommended by ELITE.
Do not disassemble the charger.
Do not use the charger if it has been damaged, it has been exposed to rain, snow or wet or damp environ-
ments, or if it has been immersed in liquid.
The battery pack and charger become hot during charging. Place the charger on a flat, non-flammable
surface, away from flammable materials and leave at least four inches (10 cm) of space to allow proper air
circulation around the charger and battery pack.
When the battery pack needs to be recharged, a charge of 3 to 5 hours will allow the tool to run at full capa-
city. A charge indicator light will illuminate in the charger to show that charging is taking place.

CHARGING THE BATTERY PACK

1. Make sure the wireless drill trigger is in the "OFF" position, then remove
the battery pack of the tool.
2. Plug the 120V AC adapter into the household outlet and the battery charger side.
Insert the battery pack into the charger.
3. Once charged, reconnect the battery pack in the cordless drill making sure to
that the pestles are firmly entrenched. The cordless drill will not work properly if
the battery pack is not properly seated.
www.ELITETOOLS.co
Keep Working
8