SYMPTOMS
DVD
Playback doesn't start.
No picture.
No sound.
Picture is distorted during CUE or
REVIEW.
Stopping playback, search, slow-
motion play, repeat play, or
program play, etc. cannot be
performed.
No 4:3 picture.
No on-screen display.
No surround sound.
The unit or remote operation key
is not functioning.
Playback does not start when the
title is selected.
Audio soundtrack and/or subtitle
language is not changed when
you play back a DVD.
No subtitle.
Angle cannot be changed.
" " appears on the screen.
REMOTE CONTROL
The remote control does not
function.
DEGAUSSING SYSTEM
This television has a degaussing circuit that will clear up color distortions on the TV screen that
are caused by any excess magnetism which happens to get too close to the TV. This circuit is
designed to operate once when the set is first plugged in. If minor color distortions are seen in
some locations on the screen, please unplug the TV for approximately 15 minutes. When the TV
is plugged back in, the degaussing circuit will operate once to clear up any color distortions.
Repeat this procedure any time the TV screen is accidentally magnetized, or when the TV is
moved or relocated.
5P20521A [E] P47-Back
POSSIBLE SOLUTIONS
• No disc is inserted.
• The disc may be dirty. Clean up the disc.
• The unit cannot play CD-ROMs, etc.
• TV/DVD selector is not set correctly.
• Check the input selector of the amplifier is set properly.
• The unit is in the Special playback mode.
• Select the correct Audio Output position on AV amplifier.
• The picture will be distorted occasionally.
• Some discs may not do some of the functions.
• The setup does not match your TV.
• Select Display On.
• The setup does not match your stereo system.
• Turn off the unit and unplug the AC power cord for several min-
utes, then replug it.
• Check the RATING LEVEL setup.
• Multilingual language is not recorded on the DVD disc.
• Some discs have no subtitles.
• Subtitles are cleared. Press SUBTITLE.
• Multi-angles are not recorded on the DVD disc.
• The function is prohibited with the unit or the disc.
• Aim at the remote control at the remote sensor.
• Operate within Approx. 5 Meters or reduce the light in the room.
• Clear the path of the beam.
• The batteries are weak. Replace the batteries.
• Check the batteries are inserted correctly.
49
PAGE
38~40
5/12/04, 2:43 PM
28
25
–
26
–
29
45
–
–
36
36
45
–
41
34
35
28
10
49