Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
If a fault occurs, run through the points listed below before taking your changer for repair.
If the fault remains, try to clear it by switching the changer off and on again. If this also fails to help, consult
your dealer.
Under no circumstances should you repair the changer yourself as this will invalidate the guarantee!
SYMPTOM
POSSIBLE CAUSE
Playback does not start or
The current CD has been loaded
interruption of playback.
upside down.
No CDs inserted.
The current CD is badly
scratched or dirty.
Moisture condensation on the lens. Leave the CD changer in a warm
Sound skips (at the same part).
The current CD is dirty.
The current CD skips tracks.
The CD is damaged or dirty.
Playback does not start from the
PRG (programME) or SHUFFLE
(of the current CD).
activated.
Loose or wrong connections.
No sound or bad sound.
Strong magnetic fields near the
CD changer.
Batteries are exhausted.
Remote control does not function.
Remote control commands are
The distance between remote
not properly received.
control and CD changer is longer
than 10 metres.

TROUBLESHOOTING

REMEDY
Reload the CD, label side up.
Insert the CDs, label side up.
Clean the CD with a soft, lint-free cloth.
environment until the moisture
evaporates.
Clean the CD with a soft, lint-free cloth.
Replace or clean the CD.
Switch off SHUFFLE or clear first track
programme.
Check connections.
Find another place for the unit or change
connections.
Replace the batteries.
Reduce the distance between remote
control and CD changer.
GB
NAD
11
Tabla de contenido
loading

Tabla de contenido