Milwaukee 48-11-1830 Manual Del Operador página 6

Cargador para baterías de iones de litio/niquel-cadmio
Ocultar thumbs Ver también para 48-11-1830:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Charging a Hot or Cold Battery Pack
The Red Flashing Indicator light on the
charger indicates that the battery pack
temperature is outside the charging range.
Once the pack is within the acceptable range,
normal charging will take place and the red
light will be continuous. Hot or cold battery
packs may take longer to charge.
Li-Ion Charging Status
Battery Pack
Red Charger
Temperature
Indicator Light
Charging Status
150°F or more
Flashing
Not charging
32°F to 150°F
Continuous
Normal charging
14°F to 32°F
Continuous
Warm-up charging
14°F or less
Flashing
Not charging
NiCd Charging Status
Battery Pack
Red Charger
Temperature
Indicator Light
Charging Status
140°F or more
Flashing
Not charging
32°F to 140°F
Normal charging
Continuous
32°F or less
Not charging
Flashing
Powering the Charger with an Inverter
or Generator
The charger will operate with most gen-
erators and inverters rated at 300 Watts
or higher.
Maintenance and Storage
Store your charger in a cool, dry place.
As a general practice, it is best to unplug
battery chargers and remove battery packs
when not in use. No battery pack damage
will occur, however, if the charger and battery
pack are left plugged in.
WARNING
To reduce the risk of injury, always
unplug the charger and remove
the battery pack from the charger
before performing any maintenance.
Never disassemble the battery pack
or charger. Contact a MILWAUKEE
service facility for ALL repairs.
To reduce the risk of injury and
damage, never immerse your battery
pack or charger in liquid or allow a
liquid to fl ow inside them.
Cleaning
Clean out dust and debris from charger vents
and electrical contacts by blowing with com-
pressed air. Use only mild soap and a damp
cloth to clean the battery pack and charger,
keeping away from all electrical contacts.
Certain cleaning agents and solvents are
harmful to plastics and other insulated parts.
Some of these include gasoline, turpentine,
lacquer thinner, paint thinner, chlorinated
cleaning solvents, ammonia and household
detergents containing ammonia. Never use
fl ammable or combustible solvents around
battery packs, charger, or tools.
Repairs
The MILWAUKEE Li-Ion/NiCd charger has
no internal serviceable parts. For cordset
repairs, return the charger to the nearest
authorized service center.
10
FIVE YEAR TOOL LIMITED WARRANTY
Every MILWAUKEE electric power tool (including battery charger) is warranted to the original
purchaser only to be free from defects in material and workmanship. Subject to certain ex-
ceptions, MILWAUKEE will repair or replace any part on an electric power tool which, after
examination, is determined by MILWAUKEE to be defective in material or workmanship for
a period of fi ve (5) years* after the date of purchase. Return the electric power tool and a
copy of proof of purchase to a MILWAUKEE factory Service/Sales Support Branch location
or MILWAUKEE Authorized Service Station, freight prepaid and insured. This warranty does
not apply to damage that MILWAUKEE determines to be from repairs made or attempted by
anyone other than MILWAUKEE authorized personnel, misuse, alterations, abuse, normal
wear and tear, lack of maintenance, or accidents.
* The warranty period for Hoists (lever, hand chain, & electric chain hoists), Ni-Cd battery
packs, Work Lights (cordless fl ashlights), Job Site Radios, and Trade Titan™ Industrial Work
Carts is one (1) year from the date of purchase.
*There is a separate warranty for V™-technology Li-Ion Battery Packs 18 volts or above that
accompany the power tools:
*Every MILWAUKEE V™-technology Li-Ion Battery Pack 18 volts or above is covered by an
initial 1000 Charges/2 Years free replacement warranty. This means that for the earlier of
the fi rst 1000 charges or two (2) years from the date of purchase/fi rst charge, a replacement
battery will be provided to the customer for any defective battery free of charge. Thereafter,
customers will also receive an additional warranty on a pro rata basis up to the earlier of the
fi rst 2000 charges or fi ve (5) Years from the date of purchase/fi rst charge. This means that
every customer gets an additional 1000 charges or three (3) years of pro rata warranty on
the V™-technology Li-Ion Battery Pack 18 volts or above depending upon the amount of use.
During this additional warranty period, the customer pays for only the useable service received
over and above the fi rst 1000 Charges/2 years, based on the date of fi rst charge and number
of charges found on the battery pack via Milwaukee's V™-technology Service Reader.
Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE
product. However, proof of purchase in the form of a sales receipt or other information deemed
suffi cient by MILWAUKEE is requested.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DE-
SCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF EVERY
MILWAUKEE PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD
NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR
ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY
COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A
CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT IN-
CLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. THIS WARRANTY
IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, WRITTEN
OR ORAL, EXPRESSED OR IMPLIED. WITHOUT LIMITING THE GENERALITY OF THE
FOREGOING, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR USE OR PURPOSE, AND ALL OTHER WARRANTIES.
This warranty applies to product sold in the U.S.A., Canada and Mexico only.
11
Tabla de contenido
loading

Este manual también es adecuado para:

48-59-281848-11-223048-11-2830

Tabla de contenido