Functional Description; Intended Use; Delivery Scope; Product Features - Bosch ALR 900 Manual Original

OBJ_BUCH-835-002.book Page 19 Friday, October 10, 2008 8:40 AM
Only use or replace power supply cables for
this unit which correspond to the types indi-
cated by the manufacturer. See the operat-
ing instructions for the order no. and types.
Never touch the mains plug with wet hands.
Do not run over, crush or pull the power sup-
ply cable or extension lead, otherwise it may
be damaged. Protect the cable from heat, oil
and sharp edges.
The extension lead must have a cross section
in accordance with the operating instruc-
tions and be protected against splashed wa-
ter. The connection must not be in water.
Always wear gardening gloves when handling
or working near the sharp tines/blade.

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.

Intended Use

This product is intended for domestic, lawn rak-
ing, scarifying or verticutting of lawn.
At higher height of cut level the product is in-
tended for collection of leaves in the lawn area.
Bosch Power Tools

Delivery Scope

Carefully remove the machine from its packag-
ing and check if the following parts are com-
plete:
– Lawnraker (ALR 900)/Verticutter
(AVR 1100)
– Handle bottom
– Handle top
– Grassbox top
– Grassbox bottom
(packed inside grassbox top)
– 4 Bolts
– 4 Wing nuts
– 2 Cable clips
– Operating instructions
When parts are missing or damaged, please con-
tact your dealer.
When fully assembled the machine weighs ap-
proximately 9.9–10.4 kg. If necessary, obtain
assistance to remove from packaging.
Take care when removing from packaging or car-
rying the machine to the lawn, as the
tines/blades are sharp.

Product Features

The numbering of the components shown refers
to the representation of the machine on the
graphic pages.
1 Handle top
2 Switch lever
3 Safety button
4 Power plug **
5 Cable restraint
6 Handle bottom
7 Grassbox
8 Ventilation slots
9 Height of cut lever
10 Serial number
** country specific
Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
F 016 L70 481 | (10.10.08)
English | 19