E-Bench KH 350 Instrucciones De Uso página 75

F CD
URTHER PLAYER FUNCTIONS
Repeat function
This function allows you to play an individual track or all the tracks on one CD repeatedly.
• To play all the tracks on the inserted CD repeatedly, press the MEMO-UP/REPEAT button
once. appears on the display.
REPEAT
To play an individual track repeatedly, press the MEMO-UP/REPEAT button twice while the CD
•
is playing. appears on the display.
REPEAT
• To deactivate the repeat function, press the MEMO-UP/REPEAT button again until
appears from the display.
Mix function
With the mix function, the tracks of the inserted CD are played in random order. To activate this
function, press the MIX button.
the STOP or MIX button.
Programmed play function
With the programming function you can compile your own music programme. Before program-
ming, the CD must be stopped by using the STOP button.
• Press the MEMORY/PROGRAM button.
• To select the required track number, press the SKIP/SEARCH button (forwards or backwards).
Press the MEMO/PROGRAM button again in order to programme the selected track.
•
• Repeat steps 2 and 3 until all the required tracks have been programmed.
• Press the PLAY/PAUSE button.
• Press the STOP button in order to end the programmed play function.
• Press the MEMO/PROGRAM button and the PLAY/PAUSE button in order to continue using the
programmed play function.
• Open the CD compartment or switch the CD player off in order to delete the programmed
track order.
Equaliser function
The music can be played with three different equaliser curves (fl at, classic and rock). Each equa-
liser curve emphasises treble, middle and bass in its own characteristic way. Press the EQ button
to select the required equaliser curve.
U
SING THE RADIO
• Press the TUNER button in order to select the radio mode.
Press the BAND button to select the waveband (AM or VHF/FM).
•
• Start the automatic tuning function by holding the SKIP/SEARCH button (forwards/
backwards) down for 1-2 seconds. When it has located a station, the tuning function stops
automatically. In the case of stations which have a very weak signal the automatic tuning
function does not stop. If a VHF/FM station is received in stereo, this is indicated on the display.
Programming stations
It is possible to programme a maximum of 10 VHF/FM and 10 AM stations, i.e. a total of 20 stations.
• When a station with a good reception has been located (see section "Using the radio"), press
the MEMO/PROGRAM button.
• Press the MEMO-UP/REPEAT button until the required programme location is displayed.
To store the located station in the selected programme location, press the MEMORY/
•
PROGRAM button;
MEMO/PROGRAM
• Repeat steps 2 to 5 to store further stations. If necessary, change the waveband using the
BAND button.
appears on the display. To deactivate the mix function, press
MIX
appears on the display.
MEMO
lights up on the display.
MEMO/PROGRAM
disappears from the display.
75
O
PERATING INSTRUCTIONS
dis
REPEAT