1. If hot water does not come out form the taps, before calling the Technical Assistance make
sure that the water and electrical connections are as specified in the relative paragraphs, or
make sure of the continuity of the phases
between the clamps and the relative fastons on the thermostat, after taking it off. If this is
not, the bipolar safety device could have come into operation (call the Technical Assistance).
2. If the warning lights does not light up, but hot water still comes from the appliance
possibly it is only a faulty bulb. For the replacement of the warning light bulb call the
Technical Assistance.
For the technical specifications, refer to the nameplate (the nameplate is located next to the
water intake/outlet pipes). Products equipped with a regulator knob have the thermostat
positioned in the <ready to use> setting indicated in the Data Sheet, according to which the
relevant energy class has been declared by the manufacturer.
This appliance is conforming with the international electrical safety standards IEC 60335-1
and IEC 60335-2-21.
The CE marking of the appliances attests its conformity to the following EC Directives, of which
it satisfies the essential requisites:
- LVD Low Voltage Directive: EN 60335-1, EN 60335-2-21, EN 60529, EN 62233, EN 50106.
- EMC Electro-Magnetic Compatibility: EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-
3-3.
- RoHS2 Risk of Hazardous Substances: EN 50581.
- ErP Energy related Products: EN 50440.
MODEL
20
Load Profile
ENERGY CLASS
wh
32.6
Energy consumption
(kWh/annum)
565
Temperature set
L (wa)
TECHNICAL CHARACTERISTICS
30
50
B
C
32.6
30.7
35.44
565
582
520
65
80
100
120
XXS
A
B
33.1
32.67
565
565
15 dB
150
200
C
29.63
33.37
582
559
60
65
6