Introduction; Manual Purpose And Contents; Target; How To Keep This Manual - Nilfisk-Advance Terra 5200B Instrucciones De Uso

INSTRUCTIONS FOR USE

INTRODUCTION

MANUAL PURPOSE AND CONTENTS

The purpose of this manual is to provide the Customer
with all necessary information to use the machine properly
in a safe and autonomous way. This includes information
about technical characteristics, operation, machine
inactivity, maintenance, spare parts and safety conditions.
Before carrying out any procedure on the machine, the
Operators and qualified Technicians must read this
manual carefully. Contact the Manufacturer in case of
doubts regarding the interpretation of the instructions and
for any further information.

TARGET

This manual is intended for the Operator and the
Technicians qualified for the machine maintenance.
The Operators must not carry out operations reserved for
qualified Technicians. The Manufacturer will not be
answerable for damages coming from the
non-observance of this prohibition.

HOW TO KEEP THIS MANUAL

The Instructions for Use must be kept near the machine,
inside an adequate case, far from liquids and other
substances that can cause damage to it.

IDENTIFICATION DATA

The machine model and serial number can be found on a
plate (28, Fig. B) affixed to the machine steering column
and readable from outside. The machine production year
is shown after the date Code on the serial plate (A04
means January 2004).
This information is useful when requiring machine
replacement parts. Use the following table to write down
the machine identification data for any further reference.
MACHINE model .........................................................
MACHINE serial number .............................................

OTHER REFERENCE MANUALS

– Spare Parts List (supplied with the machine).
– Service Manual (that can be consulted at any
Nilfisk-Advance Service Center).
2

SPARE PARTS AND MAINTENANCE

All necessary operating, maintenance and repair
procedures must be carried out by qualified personnel or
by Nilfisk-Advance Service Centers. Only original spare
parts and accessories must be used.
Call Nilfisk-Advance for service or to order spare parts and
accessories, specifying the machine model and serial
number.

CHANGES AND IMPROVEMENTS

Our Company constantly improves its products and
reserves the right to make changes and improvements at
its discretion without being obliged to apply such benefits
to the machines that were sold previously.
Any modifications and/or addition of accessory must be
approved and performed by the Manufacturer.

SAFETY

The following symbols indicate potentially dangerous
situations. Always read this information carefully and take
the necessary precautions to protect people and objects.
The machine Operator's cooperation is essential in order
to prevent injury. No accident prevention program is
effective without the total cooperation of the person
responsible for the machine operation. Most of the
accidents that may occur in a factory, while working or
moving around, are caused by failure to comply with the
simplest rules for exercising prudence. A careful and
prudent Operator is the best guarantee against accidents
and is essential for successful completion of any
prevention program.

SYMBOLS

DANGER!
It indicates a dangerous situation (risk of
death) for the Operator.
WARNING!
It indicates a potential risk of injury for
people.
CAUTION!
It indicates a caution or a remark related to
important or useful functions. Pay
particular attention to the paragraphs
marked by this symbol.
CONSULTATION
Consult the Instructions for Use before
performing any operation.
Terra™ 5200B – 146 1996 000(2)2004-08