Tabla de contenido
CONNECTING THE WATER BLOCK RGB LIGHTING TO THE MOTHERBOARD
BRANCHEMENT DE L'ÉCLAIRAGE RGB DU BLOC À EAU À LA CARTE MÈRE • ANSCHLIESSEN DER RGB-WASSERBLOCK-
BELEUCHTUNG AN DAS MOTHERBOARD • COLLEGAMENTO DELL'ILLUMINAZIONE RGB DEL WATER BLOCK ALLA SCHEDA
MADRE • CONEXIÓN DE LA ILUMINACION RGB DEL BLOQUE DE AGUA A LA PLACA BASE • ПРИСОЕДИНЕНИЕ RGB-
ПОДСВЕТКИ ВОДОБЛОКА К МАТЕРИНСКОЙ ПЛАТЕ
Connect the XC5 RGB male connector into the RGB
•
ADAPTER CABLE female connector.
Connect the RGB ADAPTER CABLE female connector into
•
the Digital RGB header on the motherboard. Make sure the
arrow on the RGB ADAPTER CABLE is plugged into +5V on
the motherboard.
By using the motherboard adapter it is not possible to control the
RGB illumination with iCUE software.
Branchez le connecteur mâle du bloc XC5 RGB au connecteur
•
femelle du CÂBLE D'ADAPTATEUR RGB.
Branchez le connecteur femelle du CÂBLE D'ADAPTATEUR
•
RGB à la prise numérique RGB sur la carte mère. Assurez-
vous que la fl èche fi gurant sur le CÂBLE D'ADAPTATEUR RGB
est branchée à +5 V sur la carte mère.
En utilisant l'adaptateur de carte mère, il n'est pas possible de
contrôler l'éclairage RVB avec le logiciel iCUE.
•
Verbinden Sie den XC5-RGB-Stecker mit der RGB-
ADAPTERKABEL-Buchse.
Verbinden Sie die Buchse des RGB-ADAPTERKABELS mit
•
dem digitalen RGB-Header auf dem Motherboard. Stellen Sie
sicher, dass das RGB-ADAPTERKABEL mit dem Pfeil an + 5V
auf dem Motherboard angeschlossen ist.
Mit dem Motherboard-Adapter kann die RGB-Beleuchtung nicht
mit der iCUE-Software gesteuert werden.
RGB ADAPTER CABLE
XC5 RGB
Collegare il connettore maschio dell'unità XC5 RGB al
•
connettore femmina del CAVO ADATTATORE RGB.
Collegare il connettore femmina del CAVO ADATTATORE
•
RGB al collettore RGB digitale sulla scheda madre. Accertarsi
di collegare la freccia sul CAVO ADATTATORE RGB all'uscita
+5 V sulla scheda madre.
Utilizzando l'adattatore della scheda madre non è possibile
controllare l'illuminazione RGB con il software iCUE.
Conecte el conector macho del XC5 RGB al conector hembra
•
del CABLE ADAPTADOR RGB.
Conecte el conector hembra del CABLE ADAPTADOR RGB
•
a la cabecera digital RGB en la placa base. Asegúrese de que
la fl echa del CABLE ADAPTADOR RGB esté enchufada a +5 V
en la placa base.
Al usar el adaptador de la placa base no es posible controlar la
iluminación RGB con el software iCUE.
•
Присоедините штекерный разъём XC5 RGB к гнездовому
разъему КАБЕЛЯ АДАПТЕРА RGB.
Присоедините гнездовой разъём КАБЕЛЯ АДАПТЕРА RGB к
•
разъему Digital RGB на материнской плате. Проверьте,
что стрелка на КАБЕЛЕ АДАПТЕРА RGB подключена к +5B на
материнской плате.
Посредством адаптера материнской платы невозможно управлять
освещением RGB с помощью программного обеспечения iCUE.
C
17
FREQUENTLY ASKED QUESTIONS
FOIRE AUX QUESTIONS • HÄUFIG GESTELLTE FRAGEN • DOMANDE FREQUENTI • PREGUNTAS MÁS FRECUENTES •
ЧАСТО ЗАДАВАЕМЫЕ ВОПРОСЫ
1. Is this XC5 RGB (1200) Water Block compatible with my motherboard?
The product supports most of the LGA-1200 motherboards on the market. Please consult corsair.com for an up-to-date list of
supported models prior to installation!
2. Is this XC5 RGB (AM4) Water Block compatible with my motherboard?
The product supports most of the AM4 motherboards on the market. Please consult corsair.com for an up-to-date list of supported
models prior to installation!
3. Is this XC5 RGB (1200) Water Block compatible with older Intel
Yes, this XC5 RGB is physically compatible with older Intel
4. Can I use XC5 RGB Water Block as a standalone part?
No, this is a water-cooling cold plate for your CPU which requires a complete custom water-cooling system,
including a standalone pump and a radiator. For more information, please visit corsair.com.
5. Can I use the XC5 RGB Water Block with aluminium water-cooling equipment?
No, you cannot! The cold plate is made from copper and should not be mixed with aluminium.
6. I s the fl ow direction important?
Yes, it is. XC5 RGB Water Block works best with coolant entering via the labelled INLET port.
However, the product will operate with reversed fl ow direction, albeit with reduced performance.
7. Can I reuse the pre-applied thermal paste on XC5 RGB Water Block for re-installation?
Re-installation of the XC5 RGB Water Block will require you clean off the pre-applied thermal paste
and apply a new layer of thermal paste.
8. Can I connect the RGB header directly to my motherboard?
C
Yes you can – using the included RGB ADAPTER CABLE. See page 17 - CONNECTING THE WATER BLOCK RGB LIGHTING
TO THE MOTHERBOARD.
9. How many RGB devices can I daisy-chain to a single channel on a CORSAIR controller?
CORSAIR recommends you connect no more than three (3) Hydro X Series RGB devices of any type
connected in a series on a single channel.
However, you can connect one (1) XC5/XC7/XC9 water block, two (2) XG7 RGB water blocks and one (1) XD5 RGB
pump unit for a total of four (4) devices.
Please note that due to the absence of a daisy chain connector, the XC5 RGB should be the last link in the chain.
Do not mix CORSAIR fans or RGB LED strips and CORSAIR HYDRO X products on the same channel on the controller.
Use a dedicated channel for other components.
®
platforms?
®
socket types, such as LGA-1150, -1151, -1155 and -1156.
18
Tabla de contenido
