Read This First!
Make a backup of important recorded data
It is recommended to copy your important recorded data to a DVD or other recording media for
storage. (
p. 29) JVC will not be responsible for any lost data.
Make a trial recording
Before the actual recording of important data, make a trial recording and play back the recorded
data to check that the video and sound have been recorded correctly.
Reset the camera if it does not operate correctly
This camera uses a microcomputer. Factors such as background noise and interference can
prevent it from operating correctly. If the camera does not operate correctly, reset the camera.
(
p. 37)
Precautions on handling batteries
•
Be sure to use the JVC BN-VF815U/VF823U battery packs.
•
If the camera is subjected to electrostatic discharge, turn the power off before using it again.
If a malfunction occurs, stop using the camera immediately and consult your
local JVC dealer
•
If a problem occurs when using the microSD card, take the card together with the camera for
repair. If one of them is not included, the cause of the malfunction cannot be diagnosed, and
the camera cannot be repaired.
•
Recorded data may be erased while the camera is being repaired or inspected. Back up all
data before requesting repairs or inspections.
Because cameras may be used for demonstration in a shop, the
demonstration mode is set to on by default
To deactivate the demonstration mode, set [DEMO MODE] to [OFF]. (
Do not cover the fan
If the camera becomes too hot inside it may cause a malfunction.
Read these INSTRUCTIONS to enjoy your CAMCORDER.
For more details on the operations, refer to the GUIDEBOOK and the PC
OPERATION GUIDE in the supplied CD-ROM.
In order to view the GUIDEBOOK, Adobe
®
Reader
must be installed.
®
®
Adobe
Reader
can be loaded from Adobe's web site:
http://www.adobe.com/
NOTE
Select your desired language with a single click.
The model name is indicated on the bottom of your camcorder.
(
p. 12
&, C
)
®
Acrobat
p. 18)
®
TM
®
Reader
or Adobe
9