Maytag Epic Z Manual De Uso Y Cuidado página 4

Gather the required tools and parts before starting installation. Read and follow the
instructions provided with any tools listed here•
• Flat-blade screwdriver
• #2 Phillips screwdriver
• Adjustable wrench that opens to 1"
(2.54 cm) or hex-head socket wrench
(for adjusting dryer feet)
• Wire stripper (direct wire installations/
• Eevel
• Vent clamps
• Caulking gun and compound (for
installing new exhaust vent)
•
Tin snips/new
vent installations/
• _/Z' nut driver or socket wrench
/recommended)
• [_3pe measure
Are you placing the dryer on a pedestal? You have the option of purchasing pedestals of
different heights separately for this dryer. You may select a 10" (25.4 cm) pedestal or a
15.5" (39.4 cm) pedestal with a storage drawer• The pedestal will add to the total height of the
dryer for a total height of approximately 46" (116.8 cm) or 51.5" (130.8 cm/, respectively.
For a garage installation, you will need to place the 10" (25.4 cm) pedestal at least
9" (22.9 cm) above the floor. You will need to place the 15.5" (39.4 cm) pedestal at least
3" (7.6 cm) above the floor.
Parts supplied
Remove parts package from dryer drum. Check that all parts are included.
4 ',eveling leg_
NOTE: Do not use leveling legs if installing the dryer on a pedestal.
Parts needed
Check local codes. Check existing electrical supply and venting. See "Electrical
Requirements" and "Venting Requirements" before purchasing parts.
• For close-clearance installations between 28.65" (72.77 cm) and 34.I 5" (86.74 cm), see
"Plan Vent System" section for venting requirements•
I_- a4._s"--_1
(86.74 crn)
Optlonal pedestal f 1_._ /39.4 cm] model shown)
The pedestals are available in several colors.
lb order, call the dealer from whom you purchased your dryer or refer to the "Assistance or
Service" section.
Pedestal Height Color Part Number
10" (25.4 cm) White MHP1000SQO
10" (25.4 cm) Black MHP1000SB0
15.5" (39.4 cm) White MHP1500SQ0
15.5" (39.4 cm) Black MHP1500SB0
15.5" (39.4 cm) Pacific Blue MHP1500SK0
Stack Kit
Are you planning to stack your washer and dryer? To do so, you will need to purchase a Stack
Kit. [b order, call the dealer from whom you purchased your dryer or refer to the "Assistance
or Service" section. Ask for Part Number 8212640.
Mobile home installations require metal exhaust system hardware available for purchase from
the dealer from whom you purchased your dryer. For further information, please refer to the
"Assistance or Service" section.
4