Connections; Audio Out; Installation - Panasonic RP-WF930 Instrucciones De Funcionamiento

1
A
B

AUDIO OUT

R
L
2
DC IN
6
OPR / CHG
12V

Connections

Connect the transmitter to the AV
unit.
The cable can be connected directly to a
stereo mini jack or to a large stereo headphone
jack if the included plug adaptor is used.
a Portable CD player, headphone stereo, radio/
tape players, personal computer, etc.
OR
Use the included mini jack/pin cord adaptor to
connect the transmitter to your equipment's
stereo pin terminals.
b Amplifier, TV set, video deck, cassette deck,
DVD player, personal computer, etc.
Connect the
household AC outlet using the
supplied AC power adaptor.
The adaptor is different for the UK.
Disconnect the AC adaptor from the household
mains socket if the unit is not going to be used for
a long time.
The unit is in the standby condition when the AC
adaptor is connected. The primary circuit is always
"live" as long as the AC adaptor is connected to an
electrical outlet.
Note
The OPR/CHG indicator lights in red when the
transmitter receives input. It does not light just by
connecting the transmitter to an AC power source.

Installation

This unit uses radio waves.
The waves can be transmitted to a range of up to
100 meters.
Note
Under optimum conditions, the headphones can pick up
clear signals from the transmitter to a maximum of
100 meters. Metal between the two units and the
presence of other radio waves can cause interference to
occur at a shorter distance. This interference can be
cleared by moving closer to the transmitter, removing the
obstructions, or changing the transmission frequency
(see page 12).
You may occasionally experience interference due to
dead spots in the area covered by the transmitter. This
phenomena occurs with any kind of radio signal and is
not a malfunction. Dead spots can be moved by moving
the transmitter and the headphones.
transmitter to a