Tabla de contenido
c)
If you discover damage or irregular operation,
immediately switch the device off and report it to a
supervisor without delay.
d)
If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
e)
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
f)
In case of fire, use a powder or carbon dioxide
(CO
) fire extinguisher (one intended for use on live
2
electrical devices) to put it out.
g)
Please keep this manual available for future
reference. If this device is passed on to a third party,
the manual must be passed on with it.
h)
Keep packaging elements and small assembly parts
in a place not available to children.
i)
Keep the device away from children and animals.
REMEMBER! When using the device, protect
children and other bystanders.
2.3. PERSONAL SAFETY
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience
and/or knowledge unless they are supervised by
a person responsible for their safety or they have
received instruction on how to operate the device.
c)
When working with the device, wear personal
EN
protective equipment that prevents:
• splashing or contact with evaporating liquid,
• contact with toxic or flammable gases.
d)
To prevent accidental starting, make sure the knobs
are in off position before connecting to the power
source.
e)
The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
2.4. SAFE DEVICE USE
a)
Do not use the device if the knobs or control buttons
do not function properly. Devices that cannot be
controlled by the controls are dangerous, may not
be operated and must be repaired.
b)
Disconnect the device from the power supply
before commencement of adjustment, cleaning and
maintenance. Such a preventive measure reduces
the risk of accidental activation.
c)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
d)
Keep the device in perfect technical condition.
Before each use check for general damage and
especially check for cracked parts or elements and
for any other conditions which may impact the safe
operation of the device. If damage is discovered,
hand over the device for repair before use.
e)
Keep the device out of the reach of children.
f)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
g)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
h)
Do not move, adjust or rotate the device in the
course of work.
i)
Do not leave this appliance unattended while it is in
use.
j)
Clean the device regularly to prevent stubborn grime
from accumulating.
k)
The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
l)
It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
m)
Keep the device away from sources of fire and heat.
n)
WARNING! When the heating function is active, the
heating mantle heats up to a high temperature. Do
not touch hot parts of the device as this may cause
burns.
o)
When working with flammable materials, pay special
attention that the set heating temperature is not too
high.
p)
Make sure that the liquid container can withstand
the set heating temperature. A melted container may
cause a fire.
q)
Never heat an empty container.
r)
Control the amount of liquid in containers. The liquid
may evaporate.
s)
Spilling the flammable contents of the container
onto the heating elements of the device may cause a
fire.
t)
The set heating temperature must be at least 25°C
lower than the ignition temperature of the stirred
substance.
u)
Special attention must be paid to the hazards arising
from:
• flammable materials and substances with low
boiling point,
• overfilled containers,
• containers made of brittle material or of low
melting point.
v)
Pathogenic materials must be stirred only in closed
containers.
w)
Do not cover the device while it is in operation.
x)
Make sure that the power cord does not touch any
heated parts of the device.
y)
Keep the device away from strong magnetic fields.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
3. USE GUIDELINES
The device is designed for use in laboratories, schools,
universities, and similar institutions. It is used for non-
contact stirring and for heating liquids in laboratory vessels.
The user is liable for any damage resulting from
unintended use of the device.
8
13.12.2019
3.1. DEVICE DESCRIPTION
SBS-LHM-1000/DH
5
4
6
3
2
7
1
SBS-LHM-1000/H, SBS-LHM-500/H
2
1
1.
control panel
2.
chamber with heating mantle
3.
probe
4.
probe clamp
5.
the element for adjusting the height and extension
of the clamp
6.
probe support rod
7.
probe cable
CONTROL PANEL SBS-LHM-1000/DH
E
H
A
F
B
C
D
G
CONTROL PANEL SBS-LHM-1000/H, SBS-LHM-500/H
C
A
I
D
A.
heating temperature control knob
B.
heating temperature control indicator light
C.
active stirring indicator light
D.
active heating indicator light
E.
button for activating the function of controlling the
heating temperature and displaying the heating
temperature
F.
increasing the heating temperature
G.
decreasing the heating temperature
H.
display of liquid temperature or the set heating
temperature
I.
stirring speed control knob
13.12.2019
3.2. PREPARING FOR USE
AMBIENT CONDITIONS
The device should be used in a working environment with
the following parameters:
5 – 40℃
Ambient temperature
Ambient humidity
≤90%
APPLIANCE LOCATION
Ensure good ventilation in the room in which the device
is being used. There should be at least 10 cm distance
between each side of the device and the wall or other
objects. The device should always be used when positioned
on an even, stable, clean, fireproof and dry surface, and
be out of the reach of children and persons with limited
mental and sensory functions. Position the device such that
you always have access to the power plug. The power cord
connected to the appliance must be properly grounded
and correspond to the technical details on the product
label.
ASSEMBLING THE DEVICE
SBS-LHM-1000/DH
Before starting to use the device, install the temperature
probe correctly.
a)
Screw the probe support rod elements together.
b)
Position the rod in the opening on the housing of the
device. The spline in the opening should fit into the
groove at the bottom of the rod.
c)
Fit the adjusting element and tighten the clamping
knob.
d)
Place the probe clamp into the adjusting element
and tighten the clamping knob.
e)
Place the probe in the clamp and make sure it is
correctly clamped. The probe should be oriented
with the cable upwards.
f)
Connect the probe cable to the suitable socket in the
housing of the device.
g)
The device is ready to use.
3.3. DEVICE USE
a)
Pour the liquid into the container and insert the
magnetic stirrer into the liquid.
b)
Place the container with the liquid inside the heating
mantle chamber.
For the SBS-LHM-1000/DH model, insert the end of
temperature probe into the liquid to a depth of at
least 20 mm.
When using a metal container, do not place
temperature probe on the bottom of the container.
Placing the temperature probe on the bottom of the
container may result in an incorrect measurement
reading. The end of the measuring probe must be
at least 5 mm from the bottom of the container; a
distance of 10 mm is the best.
c)
Plug the power cord into the device and into the
electrical outlet.
d)
Activate stirring with the knob [I]. When the stirring is
active, the stirring indicator lamp lights up.
CAUTION! Do not set the stirring speed to high from
the start. Increase the stirring speed gradually.
Depending on the model:
SBS-LHM-1000/DH
e)
Set the heating temperature by following these
steps:
• activate the heating temperature setting mode by
pressing the [E] button,
9
EN
Tabla de contenido
