Cleaning And Maintenance - OK. OVC 203 Manual Del Usuario

CLEANING AND MAINTENANCE

• Before cleaning, always switch the device off and disconnect the power plug from the socket.
Follow SAFETY INSTRUCTIONS.
• Wipe the vacuum cleaner and its accessories regularly with a slightly damp cloth.
• Do not use abrasive or scouring cleaning agents.
• Make sure that parts conducting current are not wet.
• Store the device in a dry place, protected from humidity and direct sunlight, out of reach of
children.
REPLACING FILTERS AND DUST BAG
Replace the motor- and air outlet filter:
after it has been washed approx. 15 times.
• Spare filters and spare dust bags are available in specialists' shops.
TROUBLESHOOTING
Blocked tube or hose
You can tell when the tube or hose is blocked when the suction power is reduced, motor starts
working louder or the sound coming from the inside of the hose or tube changes.
To resolve this problem, follow these steps:
• Before conducting any maintenance jobs, always switch the device off and disconnect the
power plug from the socket.
• Remove the tube or hose from the device.
• Hold the tube or hose against the light in order to see the possible foreign body.
• With a long rod or other object (which must not have sharp corners and edges), remove the
foreign body from the tube or hose.
• Once the foreign body has been removed, you can use the vacuum cleaner again.
SPECIFICATION
Operating voltage
Power input
Dust bag
• This is a general purpose vacuum cleaner
• The Erp test method is according to EN 60312-1:2013
• Please refer to below website for detail technical information, or contact the manufacturer for
technical document: www.ok-online.com
DISPOSAL
Do not dispose of this appliance as unsorted municipal waste. Return it to a designated
collection point for the recycling of WEEE. By doing so, you will help to conserve
resources and protect the environment. Contact your retailer or local authorities for more
information.
IM_OVC202_140625_V02_HR.indb 20
: 220 - 240V ~50/60Hz
: 900 W
: Paper Bag
20
25/6/14 5:37 PM